机械5

摘要 塑料在工业快速发展，提出了质量好，加工精度高，开发周期短等注塑模具的设计和生产的要求越来越高，能够适应这种需求已成为模具制造企业发展的关键因素。 本次设计的是手机充电器外壳的注塑模具。所用材料是当前应用较为广泛的材料ABS。在设计中，分析塑件的工艺性。模具结构可采用一模两腔，侧浇口进料，注射机采用HTF 160X2A型号，并对其相关的数据进行校核。首先根据UG软件设计出分型面，进而设计出型腔、型芯及斜顶抽芯机构，通过各种手册选择标准模架的绘制，并且进行浇注系统、脱模机构、冷却系统等模具重要结构的设计。最后对设计过程中的相关零部件进行了计算和校核，在无误的基础上进行了模具总装，并利用AUTOCAD软件绘制出总装及各主要零件的二维工程图，设计出一套塑料注塑模具 此次设计的过程中查阅了大量的模具设计资料，通过手机充电器外壳塑料模具的设计与应用，实现了手机充电器外壳制作工艺上的突破，同原有的设计方法相比，模具的应用不但提高了生产效率而且提升了产品的质量，模具整体设计的思路和要求符合现代设计潮流和未来的发展方向 关键词：手机充电器外壳；一模两腔；侧浇口；冷却系统；注塑模具 Abstract With the rapid developme
nt of plastics i
ndustry, the desig
n a
nd productio
n requireme
nts of i
njectio
n moulds, such as good quality, high processi
ng accuracy a
nd short developme
nt cycle, are becomi
ng higher a
nd higher. It has become a key factor for the developme
nt of mould ma
nufacturi
ng e
nterprises to adapt to this dema
nd. This desig
n is the i
njectio
n mould for the mobile pho
ne charger shell. The material used is ABSwhich iswidely used at prese
nt. I
n the desig
n, the tech
nological properties of plastic parts are a
nalyzed. The mold structure ca
n be usedwith o
ne mold a
nd two cavities, the side gate feed, the i
njectio
n machi
ne adopts the HTF 160X2A model, a
nd the releva
nt data are checked. Firstly, the parti
ng surface is desig
ned accordi
ng to UG software, a
nd the
n the cavity, core a
nd i
ncli
ned top core pulli
ng mecha
nism are desig
ned. The sta
ndard die base is draw
n throughvarious ma
nuals, a
nd the importa
nt die structures such as pouri
ng system, demouldi
ng mecha
nism a
nd cooli
ng system are desig
ned. Fi
nally, the releva
nt parts i
n the desig
n process are calculated a
nd checked, a
nd the die assembly is carried out o
n the basis of correct
ness. The two-dime
nsio
nal e
ngi
neeri
ng drawi
ngs of the assembly a
nd the mai
n parts are draw
n by AUTOCAD software, a
nd a set of plastic i
njectio
n mould is desig
ned. I
n the process of this desig
n,we co
nsulted a large
number of mould desig
n data. Through the desig
n a
nd applicatio
n of plastic mould for mobile pho
ne charger shell,we realized a breakthrough i
n ma
nufacturi
ng process of mobile pho
ne charger shell. Comparedwith the origi
nal desig
n method, the applicatio
n of mould
not o
nly improved productio
n efficie
ncy but also improved product quality. The idea a
nd requireme
nt of overall mould desig
n co
nformed to the moder
n desig
n tre
nd. Future Developme
nt Directio
n Keywords: mobile pho
ne charger shell; o
ne mold two cavity; side gate; cooli
ng system; i
njectio
n mold 目录 摘要I Abstract II 1绪论1 1.1前言1 1.2模具发展现状及发展方向1 1.2.1国内外注塑模具的发展现状1 1.2.2国内外注塑模具的发展趋向3 2塑件结构分析4 2.1塑件材料的选择及成型性能分析5 2.2塑件的结构和尺寸精度表面质量分析5 2.2.1塑件的结构设计5 2.2.2塑件尺寸及精度6 2.2.3塑件表面粗糙度6 2.3计算塑件的体积、质量6 3塑件成型方案设计8 3.1分型面选择8 3.2型腔数的确定8 3.3型腔布局9 3.4浇注系统的类型和位置的选择9 3.5成型零件结构设计10 3.5.1型腔设计10 3.5.2型芯设计12 3.6脱模机构的设计13 3.6.1脱模机构的选用原则： 13 3.6.2推杆和扁顶杆推出机构设计14 3.6.3脱模力的计算14 3.7导向与定位机构设计16 3.8斜顶的设计17 3.9排气及引气系统的设计20 3.10模温调节系统的设计20 3.11模架选用22 4模具零件设计25 4.1模具成型零件尺寸计算25 4.2模具强度与刚度校核25 4.3浇注系统的设计26 4.3.1主流道的设计26 4.3.2分主流道的设计27 4.3.3浇口的设计28 4.4模具冷却系统的设计28 5注射机的选用及相关参数的校核29 5.1相关参数29 5.2最大注塑量校核30 5.3锁模力校核31 5.4模具与注塑机安装部分相关尺寸校核32 5.5开模行程校核32 第6章模具材料的选用33 6．1成型零件材料选用33 6．2注射模用钢种33 总结34 致谢35 参考文献36