机械5

摘要 塑料在工业快速发展，提出了质量好，加工精度高，开发周期短等注塑模具的设计和生产的要求越来越高，能够适应这种需求已成为模具制造企业发展的关键因素。 本次设计的是塑料基座的注塑模具。所用材料是当前应用较为广泛的材料ABS。在设计中，分析塑件的工艺性。模具结构可采用一模四腔，侧浇口进料，注射机采用HTF 160X2A型号，并对其相关的数据进行校核。首先根据三维软件设计出分型面，进而设计出型腔、型芯，通过各种手册选择标准模架的绘制，并且进行浇注系统、脱模机构、冷却系统等模具重要结构的设计。最后对设计过程中的相关零部件进行了计算和校核，在无误的基础上进行了模具总装，并利用CAD软件绘制出总装及各主要零件的二维工程图，设计出一套塑料注塑模具 此次设计的过程中查阅了大量的模具设计资料，通过塑料基座塑料模具的设计与应用，实现了塑料基座制作工艺上的突破，同原有的设计方法相比，模具的应用不但提高了生产效率而且提升了产品的质量，模具整体设计的思路和要求符合现代设计潮流和未来的发展方向 关键词：塑料基座；一模四腔；侧浇口；冷却系统；注塑模具 Abstract With the rapid developme
nt of plastics i
ndustry, the desig
n a
nd productio
n requireme
nts of i
njectio
n moulds, such as good quality, high processi
ng accuracy a
nd short developme
nt cycle, are becomi
ng higher a
nd higher. It has become a key factor for the developme
nt of mould ma
nufacturi
ng e
nterprises to adapt to this dema
nd. This desig
n is the i
njectio
n mould of the plastic base. The material used is ABSwhich iswidely used at prese
nt. I
n the desig
n, the tech
nological properties of plastic parts are a
nalyzed. The mold structure ca
n be usedwith o
ne mold a
nd four cavities, the side gate feed, the i
njectio
n machi
ne adopts the HTF 160X2A model, a
nd the releva
nt data are checked. Firstly, accordi
ng to the three-dime
nsio
nal software, the parti
ng surface is desig
ned, a
nd the
n the cavity a
nd core are desig
ned. Throughvarious ma
nuals, the drawi
ng of sta
ndard die base is selected, a
nd the importa
nt structure of the casti
ng system, demouldi
ng mecha
nism a
nd cooli
ng system are desig
ned. Fi
nally, the releva
nt parts i
n the desig
n process are calculated a
nd checked, a
nd the die assembly is carried out o
n the basis of correct
ness. The two-dime
nsio
nal e
ngi
neeri
ng drawi
ngs of the assembly a
nd the mai
n parts are draw
n by CAD software, a
nd a set of plastic i
njectio
n mould is desig
ned. The desig
n process co
nsulted a large
number of mold desig
n i
nformatio
n, through the desig
n a
nd applicatio
n of plastic mold base, achieved a breakthrough i
n the ma
nufacturi
ng process of plastic base. Comparedwith the origi
nal desig
n method, the applicatio
n of the mold
not o
nly improved the productio
n efficie
ncy but also improved the quality of the product. The idea a
nd requireme
nts of the overall desig
n of the mold co
nform to the moder
n desig
n tre
nd a
nd future developme
nt. directio
n Keywords: plastic base; o
ne mold four cavities; side gate; cooli
ng system; i
njectio
n mold 目录 摘要I Abstract II 1绪论1 1.1前言1 1.2模具发展现状及发展方向1 1.2.1国内外注塑模具的发展现状1 1.2.2国内外注塑模具的发展趋向3 2塑件结构分析4 2.1塑件材料的选择及成型性能分析5 2.2塑件的结构和尺寸精度表面质量分析6 2.2.1塑件的结构设计6 2.2.2塑件尺寸及精度6 2.2.3塑件表面粗糙度6 2.3计算塑件的体积、质量7 3塑件成型方案设计8 3.1分型面选择8 3.2型腔数的确定9 3.3型腔布局9 3.4浇注系统的类型和位置的选择9 3.5成型零件结构设计10 3.5.1型腔设计10 3.5.2型芯设计12 3.6脱模机构的设计13 3.6.1脱模机构的选用原则： 13 3.6.2推杆和扁顶杆推出机构设计14 3.6.3脱模力的计算14 3.7导向与定位机构设计16 3.8排气及引气系统的设计17 3.9模温调节系统的设计17 3.10模架选用19 4模具零件设计22 4.1模具成型零件尺寸计算22 4.2模具强度与刚度校核22 4.3浇注系统的设计23 4.3.1主流道的设计23 4.3.2分主流道的设计24 4.3.3浇口的设计25 4.4模具冷却系统的设计25 5注射机的选用及相关参数的校核26 5.1相关参数26 5.2最大注塑量校核27 5.3锁模力校核28 5.4模具与注塑机安装部分相关尺寸校核29 5.5开模行程校核29 第6章模具材料的选用30 6．1成型零件材料选用30 6．2注射模用钢种30 总结31 致谢32 参考文献33